Описание
# Create Plus Modpack
# ZH
## 简介
这是一个以机械动力为主的轻量级整合包，适用于1.20.1Forge和Fabric。
偶尔会更新
## 计划支持
| |**forge**|**fabric**|**neoforge**|
| ---- | ---- | ---- | ---- |
|**1.21**|待机械动力支持1.21forge后将会支持|待机械动力支持1.21fabric后将会支持|待机械动力支持1.21neoforge后将会支持|
|**1.20.2~1.20.6**|因机械动力无计划支持1.20.2~1.20.6所以不支持|因机械动力无计划支持1.20.2~1.20.6所以不支持|因机械动力无计划支持1.20.2~1.20.6所以不支持|
|**1.20.1**|完全支持|完全支持|完全支持|
|**1.19.3&4**|因机械动力无计划支持1.19.3&4所以不支持|因机械动力无计划支持1.19.3&4所以不支持| |
|**1.19.2**|未来可能支持|未来可能支持| |
|**1.18.2及以下**|无支持计划|无支持计划| |
## 帮助
### 怎么安装？
整合包后缀为mrpack格式，直接将文件导入到启动器就行。
### 许可证
许可证未来可能为MIT，目前暂无许可证。
## 特点
- 修改了默认设置，将渲染距离和模拟距离改为6。
- 关掉了垂直同步，并将帧率最大值拉到无限制。
- 将[Xaero's Minimap](https://modrinth.com/mod/xaeros-minimap)的地图位置放到了右上角，避免与帧率叠加。
- 左上角显示帧率和坐标。
- 按C键可以放大（有动画），鼠标滚轮来设置放大倍率。
- 等其他的设置（自己看）...
## 优化效果
实测，作者的i5-6200渣机平均100FPS+。
## 注
github上的备用下载源只包含1.1.0及以上版本。
## 整合包版本
1.x.x
## 1.0.0
一切的开端。
# EN
## Introduction
This is a lightweight modpack mainly based on mechanical power, suitable for 1.20.1 Forge and Fabric.
It will be updated occasionally.
## Planned Support
| |**forge**|**fabric**|**neoforge**|
| ---- | ---- | ---- | ---- |
|**1.21**|Will be supported after create supports 1.21 forge|Will be supported after create supports 1.21 fabric|Will be supported after create supports 1.21 fabric|
|**1.20.2~1.20.6**|Not supported due to no plans for create to support 1.20.2~1.20.6|Not supported due to no plans for create to support 1.20.2~1.20.6|Not supported due to no plans for create to support 1.20.2~1.20.6|
|**1.20.1**|Fully supported|Fully supported|Fully supported|
|**1.19.3&4**|Not supported due to no plans for create to support 1.19.3&4|Not supported due to no plans for create to support 1.19.3&4| |
|**1.19.2**|May be supported in the future|May be supported in the future| |
|**1.18.2 and below**|No plans to support|No plans to support| |
## Help
### How to install?
The modpack is in mrpack format, just import the file into the launcher.
### License
The license may be MIT in the future, currently there is no license.
## Features
- Modified default settings, changed render distance and simulation distance to 6.
- Turned off vertical sync and set the maximum frame rate to unlimited.
- Placed the map position of Xaero's Minimap in the upper right corner to avoid overlapping with the frame rate.
- Display frame rate and coordinates in the upper left corner.
- Press the C key to zoom in (with animation), use the mouse wheel to set the zoom level.
- Other settings (check them yourself)...
## Optimization Effect
Tested, the author's i5-6200 low-end machine averages 100FPS+.
##Note:
The backup download sources on GitHub only include versions 1.1.0 and above.
## Modpack Version
1.x.x
## 1.0.0
The beginning of everything.